Creative Bee Studios

Sweet Ideas for Creative Minds - #usebothsides

Tag: River Heritage

River Heritage Mystery Quilt Reveal

River Heritage

Block-of-the-Month Mystery Quilt

Image of Mississippi River Sunset

The sunset over the Mississippi River is your final clue that the mystery has ended.

Photo by Anastasia Gonzales.

The mystery is revealed! Take all of those wonderful blocks and set them in this really fun, fast design. I am happy to tell you that River Heritage goes together quickly and easily! Image of River Heritage

Click here for printer-friendly version: River Heritage Setting Instructions

Setting Instructions 

The biggest challenge is to make sure all the setting flying geese point away from the center block. This is easy to achieve by laying out all your sections on a flat surface or design wall.

Finished Size: 66 x 66 inches                                     WOF = width of fabric

RST = right sides together                                          I list the colors in my quilt for reference.

Cutting:

Fabric A (soft-white) setting:

Cut six 6 ½” x WOF to cut

*Sixteen 6 ½” squares

*Eight 6 ½ x 12 ½” rectangles

 

Fabric B (watery aqua) setting:

For binding, cut eight 2 ¼” WOF strips

Cut four 6 ½ x WOF to cut

*Eight 6 ½” squares

*Eight 6 ½ x 12 ½” rectangles

 

Fabric C (teal batik) setting squares:

Cut four 6 ½” squares

 

Fabric D (coral) outer setting:

Cut

*Four 6 ½ x 18 ½” rectangles

*Four 6 ½ x 24 ½” rectangles

*Four 1 x 12 ½” strips

 

Fabric E (aqua) outer border*:

Cut six 3 ½” x WOF to make:

*Two 3 ½ x 60 ½” strips

*Two 3 ½ x 66 ½” strips

Setting Assembly

  1. Large Flying Geese: Draw a diagonal line on wrong side of 16 Fabric A squares. Place a marked square on LEFT side of a Fabric B 6 ½ x 12 ½” rectangle, RST. Stitch on the diagonal line. Press the corner triangle open. Trim excess fabric to ¼” seam. Repeat for the right corner of each rectangle. Make 8.
  2. Setting pieces: Draw a diagonal line on wrong side of 8 Fabric B squares. Place a square on the RIGHT side of a Fabric A 6 ½ x 12 ½” rectangle RST. Stitch on the diagonal line. Press the corner triangle open and trim excess fabric to 1/4” seam. Make 4.

 

Place a marked Fabric B square on the LEFT side of Fabric A 6 ½” x 12 ½” rectangle RST. Stitch on the diagonal line. Press the corner triangle open and trim excess fabric to ¼” seam. Make 4.

Section Assembly

I suggest laying out all the pieces of your quilt on a design wall or a flat surface to make sure you keep all the points in the correct direction. Notice that the Paddle Wheel block is in the very center and that each flying geese unit points away from that center block. I will also refer to the blocks as Center, North, South, East, West, Northwest, Northeast, Southwest, and Southeast for those who want to use different placement of their individual blocks.

 

Add a flying geese to opposite sides of each of the blocks, Eagle’s Nest (North), Railroad Crossing (South), Port and Starboard (West), and Lighted Bridge (East) as shown below. Note the direction of each block and the flying geese units. Press seams towards the blocks.

 

 

Image of Eagle's Nest Block

Eagle’s Nest/North

Image of Rail Road Crossing Block

Railroad Crossing/South

Image of Port and Starboard/West

Port and Starboard/West

 

 

 

Image of Lighted Bridge Block

Lighted Bridge/East

When you lay these units in their places above, below, and to the left and right of Paddle Wheel (Center), they should form a cross shape. Do not stitch the units together yet.

Next you will make the four corner sections, using the Flock of Geese (Northwest), Hovering Hawks (Northeast), Tree Line (Southeast), and Trail of Tears (Southwest) blocks. Check that your setting units are positioned so that the colored corners are pointing inward, towards the Paddlewheel (Center) block and so that they form an “on-point” square “floating” beneath the blocks.

Sew one setting unit to the top (Flock of Geese/Northwest and Hovering Hawks/Northeast) or bottom (Trail of Tears/Southwest and Tree Line/Southeast) of the block. Press to the setting unit. Sew a setting square (Fabric C) to the light end of the other setting unit. Press to the setting unit. Match seams, RST, and sew the two units together. Add the short outer setting bar (coral) to the side and press to the bar. Finish the corner section by stitching the long outer setting bar to the top (or bottom) of the section.

Repeat for each corner unit. Refer to the diagrams below.

Image of Flock of Geese block

Flock of Geese/Northwest

Image of Hovering Hawks block

Hovering Hawks/Northeast         

 

 

Image of Trail of Tears block

Trail of Tears/Southwest

Image of Tree Line Block

Tree Line/Southeast

 

Lay out all sections. I suggest taking a black and white picture at this point to be certain all the flying geese units are pointing away from the center Paddle Wheel block and the setting units point inward.

 

 

Making Three Rows:

Top Row – Turn the Eagle’s Nest (North) section, RST, onto the corner section, Flock of Geese (Northwest), and stitch. Press to the corner section. Add the Hovering Hawks (Northeast) corner section. Press to the corner section.

Middle Row – Turn Paddle Wheel (Center), RST, onto the Port and Starboard (West) section and stitch. Press toward Paddle Wheel (Center). Likewise, add the Light Bridge (East) section and press toward Paddle Wheel (Center).

Bottom Row – Place Railroad Crossing (South), RST, on Trail of Tears (Southwest) corner section. Stitch and press towards Trail of Tears (Southwest) section. Likewise, stitch Tree Line (Southeast) to Railroad Crossing (South) and press to Tree Line (Southeast) section.

Stitch rows together, nestling seams, and press seams open.

Outer borders: While it’s important that I give you measurements for your borders, I do suggest that you measure your quilt length through the center (and after those borders are on, do likewise with the width) to determine an exact measurement. Then cut your borders to that length. Mark the center of your border with a pin and do likewise with the edge of your quilt. Pin the border to the edge, matching the center pins and pin the border in several places from the center to the corners of the top. This will help “square” your quilt and you (or your quilter) will be very happy later that you did this!

Sew Fabric E 3 ½” x 60 ½” strips to the left and right sides of the quilt top.

Sew Fabric E 3 ½” x 66 ½” strips to the top and bottom to complete the quilt top.

Image of Quilt

Finishing your River Heritage Block-of-the-Month Mystery Quilt:

Layer your top, batting, and backing for quilting.

As a long-arm quilter, I suggest that backing and batting be 6 inches longer and wider than the quilt top. (I realize domestic machine quilters don’t need that much extra fabric and that each long-arm quilter may have a different requirement.) I used Warm and Natural Cotton Batting. I also like and often use Hobbs 80/20.

In quilting my River Heritage, I did custom quilting on each block to accentuate the piecing and uniqueness. I did a stylized free-hand quilting on the setting and border.Image of Back of Quilt

I used the Prairie Point Hanging Method and basted them on prior to adding my binding. I made these larger than normal to allow for the 6-inch requirement for our local quilt show. Notice the looseness in the points? That helps the extra-large pole to slide through easier and avoids pulling on the quilt. Before hand-stitching the points down, I folded the prairie point up over the stitched binding. Then I laid a skinny ruler along the top edge of the quilt binding and folded the prairie point back over the ruler. I stitched the point of the prairie point where it laid. This gave two binding widths of looseness in the prairie point. This isn’t necessary for normal hanging methods, but seemed to work well for this purpose.

Stitch on binding and turn by hand.

I hope you’ve enjoyed making River Heritage! I was pleasantly surprised to find a beautiful ribbon on my quilt this weekend at our local quilt show!Image of Quilt with Ribbon

Please share your quilt pictures on Facebook and Instagram using the hashtag: #riverheritage in your post!

Note: Most of the blocks in this quilt are classics, found in many books and other sources. Paddle Wheel, Tree Line, and Lighted Bridge are blocks I created to fit our theme and the setting. The setting is adapted from the book, Circle of Nine by Janet Houts & Jean Ann Wright. I love this book and recommend it (available on Amazon)!

This has been an adventure–coming up with a theme, choosing blocks (creating others), coming up with pictures for each month, and learning more about Electric Quilter 8, Canva, and WordPress! Thank you all for joining me on this journey. I hope you love your River Heritage!
                                                                                  Karla

River Heritage – Tree Line

Welcome to Month Nine, the final block reveal in the River Heritage Block-of-the-Month Mystery Quilt!Image of Trees Along River

Tree Line

Tree Line uses six flying geese to make three trees. We start by making the trunks for each tree and then add the tree tops and sky to make three columns. Use your own color scheme – your trees don’t have to be green and sky doesn’t have to be blue! Remember to check your values by taking a black and white picture of your fabric choices.

Cutting Instructions:
From light fabric:                                         From dark or medium fabric:                                
Twelve –  2 ½-inch squares (sky)                  One – 1 x 1 ½ inch (trunk)
Two – 1 ½ x 2 ¼-inch (ground)                      One – 1 x 2 ½ inch (trunk)
Two – 2 ½ x 2 ¼-inch (ground)                      One – 1 x 5 ½ inch (trunk)
Two – 5 ½ x 2 ¼-inch (ground)
One – 4 ½ inch square (sky)                           Six – 2 ½ x 4 ½ inch (flying geese)Image of Quilt Block
One – 4 ½ x 8 ½ inch (sky)
One – 4 ½ x 1 ½ inch (sky)
One – 1 ½ x 12 ½ inch (sky)                           RST = right sides together

 

Trunks:

Stitch one ground on either side of same length trunk fabric. Press to trunks. Make all three.

Flying Geese:

Draw a diagonal line on the reverse side of each light 2 ½ inch square. Place one square on the right corner of each 2 ½ x 4 ½-inch bar. Stitch on the line, chain-piecing method. Press. Open and trim center layer of fabric with scissors, leaving a ¼-inch seam. Press again. Repeat with left side for each flying geese unit. Make six.

Assembly:

Lay out block according to picture. Starting with the first column on the left, stitch the tree top to the trunk. Press to the trunk. Add the 4 ½ inch sky to the tree top. Press to the sky.

Likewise, make the second tree and then add the 4 ½ x 1 ½-inch sky. Press to the sky.

Stitch columns one and two together. Press open. Stitch the 4 ½ x 8 ½-inch sky to the top of this section.

Make the third tree using the same technique. Stitch the third column to the first section. Press open. Stitch the 1 ½ x 12 ½-inch sky to the top of the block.

Trim and square your block to 12 ½ inches.

Click here: River Heritage Month 9 Tree Line for a printer-friendly version!

 

Share your block using #riverheritage on Facebook, Instagram, and Twitter!

Congratulations! You have completed all nine blocks for River Heritage! Setting instructions will be posted on October 8th at www.blog.creativebeestudios.com.

River Heritage – Eagle’s Nest

Get a bird’s-eye view from Inspiration Point and Month Seven in the River Heritage BOM mystery quilt block: Eagle’s Nest.Image of Month Seven Ad

This is one of my favorite blocks!  It has a few more pieces and variety than the last two month’s blocks. This block has a nine-patch in the center which is set on-point and is surrounded by flying geese sections. Like the “inspirational” pictures accompanying this post, this block will have a high perch in the River Heritage quilt setting.

Inspiration Point, in the rolling hills of the Shawnee National Forest, provides a breathtaking panoramic view of the Mississippi River valley. It is located about 30 miles from Cape Girardeau, MO, near Wolf Lake, Illinois.

Image of Rock Cliffs

Approaching Inspiration Point

Image of View from Inspiration Point

Love the reflection of the tree below.

The hike to the viewing rocks is short and pleasant from the upper lot. (The lower lot looks like a pretty tough climb.) If we hadn’t seen people on the rocks, I’m not sure we would have ventured out to them, but the path isn’t as treacherous as it looked from the trail. (I don’t advise taking little ones as there are no safety rails.)Image of Adjacent RocksImage of Rocks

Image of Matt and View

My darling hubby taking me on another adventure to get pictures for River Heritage.

Image of View from Inspiration Point

Somewhere in the distance, one of those glimmers of water is the mighty Mississippi River, I am SURE of it! Since we made the trip and the climb to get these pictures for Eagle’s Nest, despite a bit of fear on my part (snakes and heights), we are going to go with it!Image of Eagle's Nest Block

River Heritage

Block-of-the-Month Mystery Quilt

Month 7 Eagle’s Nest

Welcome to the seventh month in the River Heritage Block-of-the-Month Mystery Quilt! Eagle’s Nest has lots of pieces, but they are not difficult to make. If you go one section at a time, you’ll master what might appear to be the most difficult block in the quilt, first time around! Follow the instructions for value (light, medium, and dark) and use your own color scheme to make your block. Remember to check your values by taking a black and white picture of your fabric choices.

Cutting Instructions:

For center nine-patch:                                              For cornerstones:                                         

Five dark 2 5/8” squares                                             Four light 2” squares

Four light 2 5/8” squares

 

For triangle points:                                                   For flying geese border:

Two medium 5 3/8” squares, cut diagonally              Twelve light 2 x 3 ½” bars

Sixteen dark 2” squares

RST = right sides together

Nine-patch: Lay out squares according to picture. Chain-piece column 2 on column 1, RST, pressing the top row to the right, middle row to the left, bottom row to the right. Repeat by adding column 3 to column 2, RST.  Turn top row down onto middle row, nestle seams, pin, and stitch. Press open. Repeat by turning assembly onto bottom row, nestle seams, pin, and stitch. Press open.

Add points: Fold each triangle in half and press a center mark or use a pin to mark the center. Likewise, fold each side of the nine-patch and press a center mark or use a pin to mark the centers. Match a triangle center with a nine-patch center, RST, pin, and stitch. Press towards the triangle. Repeat for other three sides. Trim and square to 9 ½ inches.

Outer Border: Draw a line from corner to corner on the wrong side of each 2-inch square. Make flying geese by laying the square on the right side of a 2 x 3 ½ inch bar, with the drawn line starting in the center of the bar and going downward to the right. Stitch on the line. Press. Open the layers and trim the center layer using scissors, leaving about a ¼-inch seam. (This leaves the original rectangle and the new triangle on top.) Repeat process for the left side of the bar. Trim/square if necessary to 2 x 3 ½ inches (same as the original bar size). Make eight.

Assemble block: Lay out flying geese, bars, and corner squares around the center block according to the picture. Stitch one flying geese on each side of one bar. Press to the bar. Make four sets. Now add corner squares, one on each end of two sets. Press to the squares.

Pin sets without squares to left and right sides of center block, being careful to match seams. Stitch and press open. Pin sets with corner squares to the top and bottom of center block, being careful to match seams. Stitch and press open.

Trim and square your block to 12 ½ inches.

River Heritage Month 7 Eagle’s Nest (printer-friendly version)

 

Share your block using #riverheritage on Facebook, Instagram, and Twitter!

Month Eight will be posted on August 13, 2018 at www.blog.creativebeestudios.com.

Subscribe below to catch all the buzz! Check out my Etsy Shop: CreativeBeeStudios (click here). Bubbles pattern is now available! #usebothsidesImage of Whale Quilt

 

 

 

River Heritage – Port and Starboard

Quilts Ahoy! Month six in our river-themed mystery quilt is called Port and Starboard.Image of River Heritage Ad

I knew from Girl Scout days and canoeing that port meant left (both words have four letters) and Starboard meant right when looking out the front of your boat, vessel, canoe, ship, or even kayak, I guess. What I didn’t know was how those terms came to be.  Here’s what I found out:

When boats were controlled by a steering oar (before the rudder was centered on the boat), it was usually on the right side of the stern. Sailors would call that side the “steering side” and eventually it became a combination of two Old English words: “steor”  and “bord”, which mean “steer” and “side of the boat”. 

The opposite, or left side, of the boat was usually used for docking and loading the boat and was known as the “larboard”. Apparently, “larboard” was too easily confused with “starboard”, so the term “port” was adopted to refer to the side that faced the porters who loaded (ported) supplies onto the boat.

So there you have it: Port and Starboard.Image at Ferry Dockign

Image of Elmer Wichern

Uncle Elmer.

Now for the ferry! While brainstorming for ways to photograph the river for this fun mystery adventure, I thought of the ferry crossing in Ste. Genevieve. I have vague memories of crossing the ferry as a kid and I knew my Uncle Elmer piloted the ferry for a number of years. My cousin, Bonnie, shared with me that he and 4 other men purchased the ferry in 1975 to keep it running for farmers who lived in Ste. Genevieve and farmed in Illinois. He would pilot the boat on the weekends during his retirement.  Uncle Elmer loved the river and spent a lot of time there. If my Aunt Alice didn’t know where he was, she could find him at the river talking to fishermen and farmers. Before he married Aunt Alice, he was a river boat pilot pushing barges from St. Louis to New Orleans. Image of Young Man Working the RiverNow his grandson, Jeff, pushes barges from Tower Rock in Ste. Gen. down the river as far as New Orleans.

Elmer’s younger brother, Bill (my dad), also worked the river as a young man. The only story I remember from my dad about working on the river is that once while in New Orleans he got an anchor tattood on his arm–and a lot of trouble from his siblings when he got home! I loved that anchor tattoo.

Image of Orville Wichern

My dad.

Image of River Crossing

The Ste. Gen – MoDoc River Ferry Summer hours  (April 1 – October 31):
Monday – Saturday: 6 am – Last run at 5:30pm; Sunday : 9 am – Last run at 5:30pm
There are different rates for pedestrian, horseback, bicycles, motorcycles, and different size vehicles plus you can choose round trip or one-way. It was a lot of fun and I recommend it! Click here for more information.Image of River Image of Ferry Piloting across River

                                                  River Heritage

Block-of-the-Month Mystery Quilt

Month 6 Port and Starboard

Welcome to the sixth month in the River Heritage Block-of-the-Month Mystery Quilt! Port and Starboard is made from sixteen half-square triangles squares, like Trail of Tears, but with a different layout. Follow the instructions for value (light, medium, and dark) and use your own color scheme to make your block. You can use as few as three different fabrics or as make your block as scrappy as you like. Remember to check your values by taking a black and white picture of your fabric choices.

Cutting Instructions:

From light fabric:                                         From dark fabric:                                        Image of Quilt Block

Eight– 4-inch squares                                     Four – 4-inch squares

From medium fabric:

Four – 4-inch squares

RST = right sides together

Half-square triangles:  Draw a diagonal line from corner to corner on the reverse side of each of the eight light squares. Layer one dark square and one light square, RST.  Likewise, layer the other three dark/light pairs, RST. Stitch ¼ inch from the diagonal line for each set (chain-piecing method). Remove and clip the threads connecting the sets. Stitch ¼ inch seam on the other side of the drawn line. Clip apart. Cut on the drawn line. Press. Trim/square each set to 3 ½ inches. Makes eight sets.

 

Repeat the above method using medium/light combination to make eight sets. Trim/square each set to 3 ½ inches.

 

Assemble block:  Position the sixteen half-square triangles according to the picture. Take a black/white photo to double-check your layout using value.Image of Black and White Port and Starboard Block

 

Turn each piece from Column 2 onto Column 1, RST. Chain-piece a ¼ inch seam on the right edge. Clip apart and press odd rows to the right, even rows to the left.

 

Repeat with the next section by turning Column 4 onto Column 3, RST, stitch and press.

Repeat with the final two columns, stitch and press.

 

Nestle seams and pin Rows 1 and 2, RST, and stitch. Press open.

Nestle seams and pin Rows 3 and 4, RST, and stitch. Press open.

Repeat with final two sections, stitch and press open.

Trim and square your block to 12 ½ inches.

River Heritage Month 6 Port and Starboard Printer-FriendlyImage of Vehicle on Ferry

 

Share your block using #riverheritage on Facebook, Instagram, and Twitter!

Month Seven will be posted on July 9, 2018 at www.blog.creativebeestudios.com.

River Heritage – Trail of Tears

River Heritage Block-of-the-Month Mystery Quilt

Month Five – Trail of Tears

 

The Trail of Tears State Park, located on the Mississippi River, in Cape Girardeau County, Missouri, is a beautiful park with four trails, three river overlooks, a lake, campsites, picnic areas, and a visitor’s center. It  also is a burial site which commemorates the tragic deaths and hardships of the forced relocation of the Cherokee.

Image of River View

View of the Mississippi River from Trail of Tears State Park.

Image of Cherokee on Trail of Tears

The visitor’s center is filled with information including audio recordings, video presentations, books, and static displays about the Trail of Tears, plus information about wildlife found in the area.

 

It is difficult to read, see, and hear about the struggle of these people at the hands of our government and, consequently, our country.  Still, it is wonderful to have the history and beauty of the state park right here in our own “backyard”.  If you haven’t been to the Trail of Tears State Park in a while, I recommend the drive, the views, and the history lesson.Image of Trail of Tears SignImage of Mississippi River

Image of Stone

Later found to have inaccuracies, this covered stone still stands to honor all those who endured the march of relocation on the Trail of Tears.

 

 

 

 

 

 

 

 

 

 

 

 

 

Image of Quilt BlockThe Trail of Tears quilt block is made from sixteen half-square triangle squares (eight made from a dark/light combination and eight made from a medium/light combination).

Follow the instructions for value (light, medium, and dark) and use your own color scheme to make your block. Remember to check your values by taking a black and white picture of your fabric choices.  I look forward to seeing the variety of blocks you make!

Cutting Instructions:

From two light fabrics:                                             From dark fabric:                                        

Four – 4-inch squares, totaling 8                        Four – 4-inch squares

 

From medium fabric:

Four – 4-inch squares

                                                                                               RST = right sides together

Half-square triangles:  Draw a diagonal line from corner to corner on the reverse side of each of the eight light squares. Layer one dark square and one light square, RST.  Likewise, layer the other three dark/light pairs, RST. Stitch ¼ inch from the diagonal line for each set (chain-piecing method). Remove and clip the threads connecting the sets. Stitch ¼ inch seam on the other side of the drawn line. Clip apart. Cut on the drawn line. Press. Trim/square each set to 3 ½ inches. Makes eight sets. 

Repeat the above method using medium/light combination to make eight sets. Trim/square each set to 3 ½ inches.

Assemble block:  Position the sixteen half-square triangles according to the picture. Take a black/white photo to double-check your layout using value.

Turn each piece from Column 2 onto Column 1, RST. Chain-piece a ¼ inch seam on the right edge. Clip apart and press odd rows (1 & 3) to the right, even rows (2 & 4) to the left.

Repeat with the next section by turning Column 4 onto Column 3, RST, stitch and press. Now you have two columns.

Repeat the above assembly with the final two columns, stitch and press.

Nestle seams and pin Rows 1 and 2, RST, and stitch. Press open.

Nestle seams and pin Rows 3 and 4, RST, and stitch. Press open.

Repeat with final two sections, stitch and press open.

Trim and square your block to 12 ½ inches.

River Heritage Month 5 Trail of Tears (Printer Friendly Version)

Share your block using #riverheritage on Facebook, Instagram, and Twitter!

Month Six will be posted on June 11, 2018 at www.blog.creativebeestudios.com.

Image of BeeIf you visit the Trail of Tears Visitor Center soon, you may experience the carpenter bees working at the entrance. While their buzzing is loud, they aren’t aggressive at all and are too busy making holes in the soft wood to bother you. It’s kind cool and I had to get a picture of one to share, because…you know. 🙂

Subscribe for posts to come to your email. Please share the mystery with friends – it’s not too late to start!

Welcome the latest #usebothsides pattern: Angelina!

Month Four – Lighted Bridge

River Heritage Mystery Quilt continues with Month Four!Image of Month Four Promo

Lighted Bridge

The Bill Emerson cable stay bridge stands over the Mississippi River between Cape Girardeau, Missouri and East Cape Girardeau, Illinois. Opened in 2003, the bridge is a beautiful landmark which thousands of people cross each day. Lighted at night, it is a beautiful  and iconic structure,  especially in the month of October when all the lights are pink for the Pink Up Cape breast cancer awareness campaign. The bridge is 4,000 feet long, 100 feet wide and is illuminated with 140 lights.

 

Lighted Bridge is made of four large flying geese (depicting the lighted cables and their reflection in the river) and three strips (sky, bridge roadway, and water). Image of Quilt BlockFollow the instructions for value (light, medium, and dark) and use your own color scheme to make your bridge block. Remember to check your values by taking a black and white picture of your fabric choices. I look forward to seeing the variety of bridges we make!

Lighted Bridge uses light fabric for the two bridge cables, medium for the lighted night sky and reflected cables, and dark for the bridge roadway and water.

Cutting Instructions:
From light fabrics:                                                                                                                       From dark fabrics:
Two – 3 ½ x 6 ½ inch rectangles                                                                                                         One – 1 x 12 ½ inch strip for bridge roadway
From medium fabrics:                                                                                                                             Four – 3 ½ inch squares for water
Two – 3 ½ x 6 ½ inch rectangles                                                                                                        One – 3 x 12 ½ inch strip for water
for reflected cables
One – 3 ½ x 12 ½ inch strip for sky
Four – 3 ½ inch squares for sky                                                                                            RST = right sides together

Flying Geese: Draw a diagonal line on the reverse side of the four medium and four dark squares. Position a medium square RST on the corner of a light rectangle. Stitch on the line. Press. Peel back the top triangle of the square you just pressed and trim the middle layer to ¼ inch from the seam to reduce bulk. Repeat this process at the opposite corner of the rectangle. Flying Geese should be 3 ½ x 6 ½ inches. Trim if necessary. Repeat with second light rectangle. Makes two light flying geese.

Align one light flying geese RST on another, making sure they are facing the same direction. Stitch on the right side. Press seam open.

Position a dark square RST on the corner of a medium rectangle. Repeat instructions for Flying Geese above. Repeat with second medium rectangle. Makes two medium flying geese.

Align one medium flying geese RST on another, making sure they are facing the same direction. Stitch on the right side. Press seam open.

Block Assembly:
Refer to the picture to lay pieces in order from top to bottom.
Place medium strip RST on light flying geese. Stitch; press to strip.
Place dark 1-inch strip RST on light flying geese. Stitch; press to strip.
Place dark 3-inch strip RST on bottom of medium flying geese. Stitch; press to strip.
Place medium flying geese on 1-inch strip RST. Stitch; press to strip.
Trim and square block to 12 ½ inches.

Image of Lighted Bridge

View from Red Star Boat Ramp

Printer Friendly Version

Share your block using #riverheritage on Facebook, Instagram, and Twitter!

Month Five will be posted on May14, 2018 at www.blog.creativebeestudios.com.

 

Visit Creative Bee Studios (click here) 

Shop Etsy – Creative Bee Studios (click here)

 

 

Chain-piecing a Quilt Block

When piecing a sampler quilt (like the current River Heritage Block-of-the-Month Mystery Quilt), chain piecing individual blocks can save you time and help you stay organized.

Since we have all levels of quilters participating in the mystery, I want to share a technique which would help our newer quilters down the road. Chain-piecing.  It’s something I take for granted now, but I remember the lightbulb going on when I was first taught to chain-piece. Here’s how I approach chain-piecing an individual block (which might just show up down the road (river?) in your mystery quilt).

Have you ever given road directions to someone and said, “It’s not nearly as confusing as it sounds.”? That’s how describing chain-piecing is. Hand’s on, it’s easy to grasp. In words, it seems confusing. Take it a step at a time the first few times and soon you’ll be chain-piecing without even thinking about it.

*Cut and prepare your block pieces. In the example I use here, the block is made from all half-square triangles (HST).

 

*Arrange your block pieces according to the block design. (I like to use my ironing board surface.) If it’s a complicated design, I like to check myself by taking a black and white picture (to see value) to make sure I’ve arranged the pieces correctly.

Image of Quilt Block

This quilt block is made of four rows and four columns.

 

*Notice that there are four rows (left to right) and four columns (top to bottom). Turn each HST in Column 2 over onto the HST to the left, in Column 1, right sides together (RST) as shown.

Image of Chain Piecing a Quilt Block

Turn Column 2 onto Column 1, RST.

Likewise, turn each HST from Column 4 over onto the HST to the left, in Column 3, RST.

 

Layer the sets in order, starting with Row 4 on the bottom, offsetting them to keep them distinctly separate as shown below.

Image of Layered Block Sets

Layer the sets from the bottom up to take to your machine.

Carry them to the machine, keeping them in order.

 

Starting with the top set, stitch along the right edge. 

As you get close to the end of stitching the first set, have the next set ready to slide under the presser foot. (I love using my knee bar for this step.) Stop stitching for a moment before you come off the edge of the first set. Slide the second set just under the foot so that it catches the feed dogs, but isn’t touching the first set and continue stitching. It is okay to have two or three “air” stitches between sets. Repeat this for all the sets.

 

Trim the threads between all the sets, keeping them in order. (Your first set is from Columns 1 & 2 in Row 1 and your last set is from Columns 3 & 4, Row 4.)

Press according to block instructions and arrange them in again, only now you have two columns.

Image of Chain Piecing Technique

Now you have two columns.

Turn Column 2 onto Column 1, RST, for all four rows. Again, layer the four rows with Row 4 on the bottom and Row 1 on the top. Take to the machine and chain piece along the right edges.

Image of Chain Piecing Technique

Turn Column 2 onto Column 1 and stitch.

Clip threads, press, and arrange the rows in order. With the columns complete, you only have four rows left to piece.

Image of Block Rows

Rows 1 is at the top and Row 4 is at the bottom.

Continue by piecing the rows together, turning Row 1 down onto Row 2, RST. Nestle and pins the seams. Repeat for Row 3 and Row 4. Stitch along the top edges.

Trim and press. Now lay the two remaining rows in order. Turn Row 1 down onto Row 2. Nestle and pins the seams. Stitch along the top edge. Trim and press.

Remember to square and trim your block according to instructions.

If you are a new quilter, what techniques are you wanting to learn? If you are an experienced quilter, what are your favorites to share?

Month Four in the River Heritage Block-of-the-Month Mystery Quilt will be revealed on Monday, April 9 at 9 a.m.!Image of Three Quilt Blocks

 

 

Heading to AQS Quilt Week in Paducah? How about stopping in Hancock’s of Paducah? You’ll see TEN #usebothsides hanging there with patterns during the show!

Image of Three Quilts

Phoebee, Belle, and Lily

Image of Three Quilts

Rose, Emily, and Kate

Image of Cauldron Wall Hanging

Something’s Brewing

Image of Seahorse Quilt

Sally Quilt Pattern

Image of Flamingo Quilt

Fiona Quilt Pattern

Image of Poinsettia Quilt

Pepita Quilt Pattern

Simple Designs for Stunning Quilts

Grace features a soft blue mason jar with a lovely spray of pink flowers.Image of Grace Pattern Cover

 

She’s petite. Just 18 x 24 inches.

The Grace quilt pattern is a great way to try out the #usebothsides pattern. As with all the patterns,  you learn how to audition your focus and background fabrics to make a delightful, cheery wall hanging. With a focus fabric kit (you still provide the background fabrics), you know you’ll have the perfect mason jar and floral spray.

Shop all the #usebothsides patterns and kits HERE.

Next Colorful Petals Class:

Image of Three Quilts

Colorful Petals Quilt Patterns

Saturday, March 17th

10 a.m. – 3 p.m.

at The Golden Needle in Cape Girardeau, MO

Join the River Heritage Block-of-the-Month Mystery Quilt fun! Click the pictures here for links to the Introduction and Months One and Two:

Subscribe below to get posts automatically sent to you once a week.

Visit www.etsy.com/shop/CreativeBeeStudios.com

Free Block-of-the-Month Mystery Quilt

Month One for River Heritage Block-of-the-Month Mystery Quilt is well underway!

With Month Two being revealed right here on Monday, February 12th, I thought we’d take a look at the blocks shared so far with the hashtag: #riverheritage

These blocks use dark, medium, and light fabrics of your choice.

See the Introduction HERE for more information about the quilt, including the setting.

Image of Mystery Quilt Poster

Click here for link to Introduction.

Click HERE for Month One: Paddle Wheel

Image of BOM

Click here for link to Month One.

 

Look at all the fabulous fabrics used in these Paddle Wheels!Image of Paddle Wheel BlocksImage of Paddle Wheel BlocksImage of Paddle Wheel Blocks

It’s not too late to start this free mystery quilt. Make your Paddle Wheel today!

Subscribe below to receive blog posts directly to your email or check back here on the second Monday of each month for the next block reveal!

Share your blocks with this in the post: #riverheritage

#usebothsides Pattern NEWS: Sally has a new friend!

Image of Flamingo Quilt

Fiona – Click HERE

Image of Seahorse Pattern

Sally – Click HERE

Shop all the #usebothsides patterns at www.etsy.com/shop/CreativeBeeStudios

Mysterious Values

Value can be a head-scratcher. When separating your fabrics for a project like…let’s just say, the FREE River Heritage Block-of-the-Month Mystery Quilt, you might find yourself guessing which fabric goes where.

That’s because the fabric value can change, depending on what value it is next to.

Say what?

How can a fabric value change, you ask? While the value of the fabric itself doesn’t physically change, how you see that value can be affected by what is around it. Let me explain and then give you a simple way to test your values…

Here are three piles of fabric stash I’ve selected for my River Heritage. Dark, Medium, Light. Straight forward.Image of Fabric Stash

 

However, if I were to choose to use a dark Light and a light Medium together, they suddenly look similar.

I’ll use my first-run at BOM as an example.

Because I like to mix it up with background fabrics in my #usebothsides quilts, I thought I could do that with my BOM as well. As you can see, the neutral on the bottom right from my Lights pile stands out and interferes with the rest of my block. (My eye goes right to it.)

Image of Paddle Wheel

See how the bottom right square competes with the rest of the block?

My Medium looks too light when I use that dark of a Light!

Or you could say…

My Light looks too dark when I use that light of a Medium!

The best way I have found to truly see the value of a fabric is to take a black and white picture.

Image of Black and White Paddle Wheel Block

Check your values by taking a black and white picture.

Boom. There it is. Block is fixed.

Image of Paddle Wheel Block

Paddle Wheel
Month One
River Heritage

(Now how did those too Grunge Dots get so close together? Come here, Sam ( the seam ripper). Read more about The Tricky Traits of Value here and here.

So why does mixing of values work in other quilts? Mixing up my neutrals for #usebothsides works because my focus fabric is a very vivid Dark value. Even a dark Light or light Medium  works in the background of these quilts.

Image of Quilt with Bee.

Phoebee was designed using both sides of a focal fabric.

You can really see that in Phoebee the focus fabric will be strong enough to override even a medium background fabric.

While I still want to encourage you to live on the edge (only in quilting circles) and mix up those fabrics, you do have to pay close attention (maybe even more so) to values.

If you’ve been in my classes, you know I don’t give any opinions about fabric options until I’ve taken a black and white picture first. I’ve been stumped many times by guessing and it’s just easier to know for sure. So grab your stash  and your camera and sign up below for the FREE River Heritage Block-of-the-Month Mystery Quilt! The clue for Month Two is three weeks away!

Subscribe to my blog posts below to get the mystery clues sent directly to your email when they post! Share with friends and on social media. Share your progress using #riverheritage and let’s do this together!